Mild Steel Mandrel Bends 5" (127mm) OD

Mild steel mandrel bends, commonly used in exhaust fabrication or repair. No reduction in diameter when compared with press-bent options. Measured by the outside diameter (OD).

• Uncoated mild steel
• 1.6mm nominal wall thickness
• 240mm equal leg lengths (approx.), 300mm on 90° bend. Leg lengths are only approx, as leg lengths can vary per batch. If you need exact leg length measurements on a specific size bend, please contact us. 
  
• Several bend angle options available

Note: Image for reference only; does not relate to size or leg length.